asMODus - .Blank 24mm Single Coil RDA

asMODus - .Blank 24mm Single Coil RDA

ASMOBLANK

asMODus Point Blank RDA 24MM

The next step in our quest to develop the ultimate in single coil rebuildable dripping atomizers, the .Blank is sure to deliver great flavor and vapor with minimal leaking. Constructed of premium stainless steel, the .Blank RDA utilizes a build deck design similar to the Bunker and C4 RDAs, with large, wall-like posts located on each side of the atomizer acting as chamber reducers, condensing the vapor produced in the chamber for peak flavor and vapor production. The leads of the coil can be tightened in place with the use of two hex grub screws, and the outer curved edges of the posts allow for the leads to be trimmed to the perfect length after the grub screws are tightened, making installation a breeze. The bottom of the large juice well takes a concave form, allowing for any juice fed into the RDA to be funnelled towards the wick.

We have taken the liberty of integrating a unique leak resistant top down airflow path into the design of the .Blank that allows for the incoming air to enter the atomizer through an array of 6 separate top airflow slots. These adjustable slots are designed to reduce turbulence with the additional benefit of preventing leakage, a welcome feature for fans of squonker mods, and can be fine tuned by simply rotating the exterior barrel when the top cap is mounted on the base. A set of locking notches and protrusions machined into the top cap and deck help to keep the top cap in the optimal position for intense airflow sure to produce dense, rich clouds. This locking design allows for the .Blank to be easily removed from a mod even when the threads are seized up.

Incoming air enters through top inlets and is directed downwards through the posts before turning inwards towards the center of the .Blank, where it enters the chamber at the perfect angle to come in contact with the bottom of the installed coil for optimal flavor and vapor production. The cap of the .Blank is deeply engraved with an asMODus wheel on each side, and features a low-profile ceiling for optimal flavor with a PEEK disc used for the adjustable airflow system. Topping off this gem of a rebuildable dripping atomizer is a tapered 810 wide bore Delrin drip tip which allows for immense amounts of flavor while allowing for deep, lung-filling inhales. The pinnacle of our constantly evolving series of RDAs, the .Blank is sure to hit you as hard as a round fired at point blank range.

Product Specifications

• 24mm diameter
• Compatible with single coil builds
• Leak resistant
• Adjustable sextuple top airflow slot design
• Turbulence reducing airflow slots
• High quality stainless steel construction
• Chamber reducing hollow wall style posts
• Low profile ceiling Concave juice well floor
• Deep juice well
• Leads tightened with hex grub screws
• PEEK insulator and airflow disc
• Tapered 810 wide bore
• Delrin drip tip
• Stainless Steel plated standard and BF compatible 510 pins 510 connection

Package includes

• 1x asMODus .Blank 24mm BF RDA
• 1x BF squonker 510 pin (pre-installed)
• 1x Standard 510 pin
• 2x Oni 0.2? triple fused Clapton coils
• 2x Allen key
• 1x Spare parts bag
• 1x User manual